Ultimate Guide On Yamaha Golf Cart Stop Switch Bypass

If you are dealing with a problem with your Yamaha Golf Cart stop switch, then it can get really freaky when you will not be able to stop your cart at the golf course. The easiest way out of this situation is to bypass your stop switch. 

To perform a bypass, use a jumper wire to connect the small positive connection on the solenoid to the 48V positive terminal. Then flip the cart’s key to the ON position and depress the accelerator.

So, if you are in need of a detailed discussion about the Yamaha golf cart stop switch bypass, then we believe our following piece will be right above your alley. 

Ultimate Guide On Yamaha Golf Cart Stop Switch Bypass
Ultimate Guide On Yamaha Golf Cart Stop Switch Bypass

What Does a Yamaha Golf Cart Stop Switch Do?

The stop switch is one of your golf cart’s many microswitches. After you release the pedal, this switch acts as a safety precaution to stop the vehicle. 

When the pedal of your golf cart is depressed, the switch is activated. And this allows the solenoid to connect with the switch and start your cart. The circuit is cut when it is released, and the vehicle is destroyed. 

If the solenoid doesn’t click when the car tries to start, either this switch or the key switch may malfunction.

How to Bypass a Yamaha Golf Cart Stop Switch?

When you have a malfunctioning stop switch in your Yamaha golf cart, you may face problems like not being able to stop your golf cart. And that can cause many serious accidents. 

So, whenever you see such an issue, you should immediately address the problem and fix it. And bypassing the stop switch will be a fruitful solution in this situation. 

But how to do it? Let’s read below and find out about it.

  • Raise the rear wheels of your Yamaha golf cart to access the underneath and switch the golf cart into service mode.
  • Transfer the voltage from the 48V positive connection to the solenoid’s tiny positive terminal using a jumper wire.
  • Press the accelerator after turning the cart’s key to the ON position.
  • Verify the wheels’ regular rotation.
  • Reevaluate the circuit connections and repeat steps 3 and 4 if the wheels aren’t rotating.

How to Replace a Yamaha Golf Cart Stop Switch?

In case your problem isn’t solved by bypassing the stop switch, you may need to replace it with a new one. You can get it done by a professional or you can do it by yourself.

If you intend to do it by yourself, here are the instructions you will need to follow in order to replace your golf cart stop switch:

  • Remove the floor mats from your cart to reveal the floor plate.
  • Pull the stop switch and remove the floor plate.
  • Release the wiring harness clip by going there.
  • Clean the rocker plate employing electrical contact cleaner after disassembling the backing plate.
  • Take the other end of the switch, flip it over, and be cautious not to lose the spring or ball bearing in the process.
  • Stretch the spring out somewhat. The spring should now occupy a more significant portion of the mounting hole as a result.
  • Evaluate your cart.
  • Reassemble and reinstall the switch if everything is in working order.

How Do I Reset My Yamaha Golf Cart Motor?

The reset button on the chassis of electric golf cart motors is intended to return your motor to the condition it was in when it left the factory.

It may not fix any damage that the motor may have sustained over time. But it undoubtedly aids in reversing any modifications to the operation that may have taken place.

For instance, a reset can resolve the issue of the internal computer of your motor. It can bring you the solution if the terminal computer has been damaged and is no longer operating as smoothly, leading to motor failure.

More importantly, a good reset can correct any mistakes the motor has accrued through time and restore appropriate electrical flow.

By following these easy steps, which, thankfully, are relatively typical for most models, you can quickly reset your engine.

  • In a location where you feel comfortable working, park your golf cart.
  • To keep the cart in position, turn it off and place it in park mode.
  • If you wish to stop the front wheels from moving, you can put cinder blocks in front of and behind them.
  • Find the cart’s motor cover, which is frequently toward the back of many types.
  • Carefully remove the lid with a screwdriver to make it accessible for simpler use.
  • Find your motor’s main battery source, which is typically the larger battery.
  • Look all over this source for a tiny red button that might or might not say “Reset.”
  • To restart the motor, hold down and press this button for a brief period of time before letting go.
  • Reattach the cover to the motor of your golf cart using the screwdriver.
  • Take the golf cart’s cinder blocks out.
  • To restore your motor to peak performance, reconnect your battery charger.

Your golf cart motor has now been reset, and you can check to see if it starts when the battery has fully charged. 

Put the key in the ignition, get behind the wheel, and turn it on to see what happens. The motor should start very soon.

You might want to try rebooting your motor again if the motor won’t turn over for whatever reason because it might take several tries to operate.

Frequently asked questions (FAQs)

Even though we have discussed the Yamaha golf cart stop switch bypass issue at length, there may be a few things striking your mind. 

Now for a deeper understanding of the subject matter, you can check out the following questions.

Why won’t my Yamaha golf cart go the other way?

A Yamaha golf cart’s inability to reverse may be caused by a malfunctioning controller, faulty F&R switch, or a blocked shift fork. You must replace your solenoids if your golf cart can only travel forward.

Where is the reset button on a Yamaha electric golf cart?

Look for a red button after exposing the motor. The reset button fixes any small mistakes since it functions as a miniature fuse box for the motor. The majority of the wires are linked there, which is typically close to the main power supply.

How do you bypass the pedal switch on a golf cart?

Simply connect both of the large side wires to the solenoid’s terminals to bypass the solenoid. Try to start the cart after establishing the connection.

Conclusion

Dealing with a microswitch problem can be a huge headache. And facing a stop switch issue on the golf course for the first time can be a breathtaking experience. 

That’s why it is very important for you to always keep the maintenance of your golf cart up to date. In this way, you can avoid many accidents and save a lot of money in the long run. 

Hope our detailed discussion about the Yamaha golf cart stop switch bypass has been fruitful to you. Now you will be able to bypass your golf cart switch without anyone’s help. Happy Golfing!

Similar Posts