E Z GO Golf Cart Transmission Problems -Why & How To Fix?

EZGO has been a constant among golf cart users because of its reliability and experience. They offer a wide range of golf carts with multiple features. However, you may encounter issues with transmission with the EZGO cart.

The fixes for EZGO golf cart transmission problems include changing the bearing, replacing the transmission, etc. Changing the rear/front wheel hub if they are shot can also do the trick. Fixes vary on the degree of the problem that you are encountering.

That’s not all! Let’s dive into the core of EZGO Transmission problems and fix them!

Troubleshooting and fix for e z go golf cart transmission problems

Transmission acts as the messenger for transferring power from the engine to the wheels. When this process is hampered, you will encounter issues with your EZGO Golf Cart.

There are multiple ways of recognizing the transmission problem of your EZGO cart. We have provided a list at the bottom of this paragraph:

  • EZGO cart not moving on flat grounds
  • Unable to move forward or reverse
  • Issues with reaching the desired speed
  • Uncomfortable noise / Grinding noise
  • Slipping transmission

These are some of the common issues that are often faced with the EZGO cart when they undergo transmission issues. So you might be asking for the solutions/ ways to fix these problems.

All of these problems are fixable and might require you to tinker with the EZGO cart. We will tinker with each possible problem and provide a solution for the transmission problem.

Loss in Power of the EZGO Golf Cart for Transmission Problem

When the transmission is unable to pass the power to the wheels, you may experience a difference in speed. This can occur all of the time or occur abruptly, causing a hindrance to your driving.

You may also encounter a whining sound if you encounter this problem. If this is the case, jack up the golf cart, hold the brake pedal and check for the hub that spins. If you find one spinning, the problem lies up there.

Cleaning the area might do the temporary trick. However, if the issue returns back, changing the hub completely might be the best solution. The prices of hub assemblies vary from 20 to 150+ dollars. Hence, do pick the one that is suitable for your EZGO cart.

Unable to move either forward or backward in EZGO Golf Cart Transmission Problem

A similar reason can be stated for this problem’s cause, as the transmission might not be functioning properly. With this problem, driving the cart becomes extremely difficult and requires urgent fixing.

In order to fix this issue, you would need to check the levels of transmission fluid. If it is old, try replacing the fluid with a new one for about 150 dollars.

While you are on this, you should also check if the drive clutch is acting correctly or if the drive belt is okay or not. Malfunctioning or damage to these parts can result in the loss of functionality of the cart.

Both fixes range from around 200 dollars to about 500 dollars. You should get the help of a professional to do this fix for you.

Grinding Noise From EZGO Golf Cart Transmission Problem 

Grinding noises can be unpleasant and generated from worn, damaged gears, transmission fluids, etc. Oftentimes, people seem to overlook this sound until it becomes unbearable.

There is an easy fix to this solution, where you would need to get your hands dirty. A stripped brake hub can create this issue. Take off the rear wheel hub and locate the castle nut in the middle.

Once spotted, check if it is tightly inbounded or not. A loose center nuts’ spinning motion can generate a grinding noise. If this does not do the trick, you might need to look into the transmission drive clutch and belt.

Clutch Issue with the EZGO Golf Cart Transmission Problem 

Whenever the belts are not properly fit inside the EZGO golf cart, it can grind with the rear end of the transmission. This can cause the clutch to malfunction.

To fix this problem, you would need to open up the rear end in gear and remove the transmission drive belt. Once that has been removed, try turning the rear clutch by hand. 

In the meantime, make sure that the tires rotate smoothly and it does not touch the transmission. However, even if this does not fix the problem, visiting a mechanic would surely help you.

Maintenance Tips Avoid E-Z-GO Golf Cart Transmission Problems

In this section, we provide you with some tips for your EZGO carts to keep them problem-free. By following a couple of tips below, you will be able to keep your cart away from any transmission issues.

  • Regularly check the water level in the battery
  • Frequently change the transmission fluid
  • Keep your cart clean and wash it every week/fortnight
  • Take your cart for a maintenance check every 2-3 months
  • Inspect regularly for dirt and debris entering the crevices of the EZGO cart


In this part, we will look into the most frequently asked questions related to the transmission problem of EZGO Golf Cart. We hope this will help you solve your queries.

Should you seek help from a professional from the beginning for your EZGO Golf Cart’s transmission problem?

This depends on you totally. If you have been owning the EZGO cart for a long time and feel comfortable about diagnosing it yourself, please proceed forward. However, if you are unsure, it is better to seek help from a professional.

Where can you find the replacement materials for your EZGO Golf Cart transmission problem?

You can easily find the replacement materials/ parts from your nearest local automotive store. They should also be available on online platforms like Amazon, eBay, etc.

Will the EZGO golf cart transmission problem appear in the future again after fixing it?

It is possible for the EZGO cart to undergo another transmission issue. We advise you to follow the maintenance tips that we have provided you with. That should increase the longevity of the EZGO cart and keep it risk-free.

Final Words

We believe this article was insightful and helped you access the problem of transmission for your EZGO golf cart. A quick tip before ending our talk today is to always remove the battery before inspecting the issue.

This significantly reduces the risk of electrocution and helps to find the source more easily. 

Similar Posts