PXG 0311P vs. TaylorMade P790 Irons | A Detailed Comparison

Irons are one of the most valuable pieces of golf equipment. But when it comes to choosing the best set of irons, it can be an overwhelming experience. Because nowadays, various types of clubs are found on the market. 

Among them, the PXG 0311 P GEN4 and TaylorMade P790 irons are today’s two most innovative drivers. They’ve got the proper combination of design, size, forgiveness, and ball speed. But they have some differences too. For instance, the PXG 0311 P GEN4 irons are slightly more pricey than the p790 irons. 

However, PXG 0311 p vs p790 irons which one should you choose? If you want to get the answer, read the entire article. In this article, you’ll get an overview of these two along with a comparison chart of the specs of individuals. 

Overview Of P790 Irons

TaylorMade is one of the most recognized brands worldwide and has been developing world-class golf clubs for decades.

The p790 iron is one of them. It has a forged hollow-body construction that makes the head sleeker and slimmer. This literally improves the playability. 

The key technology it uses is SpeedFoam Technology. Ultra-light urethane foam is injected inside the club head to improve the overall feel, sound, and ball speed.

It also has a low-profile tungsten weight injected into the lower part of the head. It allows for a lower center of gravity (CG), which delivers a higher launch.

Besides, this p790 iron comes with a classic design along with modern technology. Overall, it is a high-performing golf club with explosive forgiveness, distance, and control as well.

Overview of PXG 0311P Irons

The 0311p GEN4 iron is manufactured by PXG, a new golf equipment manufacturer that was founded in 2014. It is famous for producing high-performing irons along with modern technology and design.

This 0311p gen4 iron is a superb combination of forgiveness, distance, and playability. One of the most noticeable features of this iron is the XCOR System. It is a result of a proprietary polymer filling that is placed behind the face.

It improves the overall sound and feels and increases the ball speed. Moreover, it has an ultra-thin face that is made of high-strength HT1770 maraging steel.

It makes the iron soft and improves forgiveness. After all, the PXG 0311p irons come with an average size and outstanding strength, look, sound, forgiveness, and workability. 

PXG 0311 p vs p790 irons: Comparison Chart

To select the most suitable iron for your game, it’s very essential to compare their specs. So, in this section, we’ve attached a comparison chart of the specs of these two irons. Let’s get into it. 

Criteria PXG 0311 P GEN4TaylorMade p790
Brand PXG TaylorMade 
Material (face) HT1770 maraging steel4140 stainless steel
Weight 36”36”
Offset 4.1 mm2.1 mm
Forgiveness Less forgiving More Forgiving 
Sound Much Better Less Better 
Ball speed 113.7 MPH 137 MPH
Hand orientation RH/LHRH/LH
Spin rate5207 rpm6428 rpm

What Are The Differences Between PXG 0311 p and p790 irons? 

Though there are many similarities between these two, there are also some noticeable differences. The key differences between PXG 0311 p GEN4 irons and p790 irons are discussed below: 

Forgiveness and Offset: PXG 0311P Vs P790

In terms of forgiveness, both of them are superb. But the p790 irons are versatile drivers as they have minimal offset along with excellent forgiveness.

The Speedfoam technology and Inverted Cone Technology allow you to hit longer shots and offer a larger sweet spot. 

However, since the PXG 0311 p gen4 irons have enough forgiveness, you won’t find them with minimal offset.

Or if you get your expected offset level from a PXG 0311 p iron, there’ll be a lack of your required forgiveness. 

Looks: PXG 0311P Vs P790 

Both of these irons are premium and come with an amazing design and look. Whether the TaylorMade is a little bit classy, the PXG is a modern sensation. 

Moreover, when p790 irons have longer sizes, PXG 0311p irons come in average sizes. 

Sound and Feel: PXG 0311P Vs P790 

In terms of feel, the p790 irons are better than the PXG 0311 p gen4 irons. But in terms of sound, the 0311p gen4 irons can create a softer and more crisp sound while hitting the ball. 

However, in a p790 golf driver, the weight is nicely distributed all over the iron, which makes it very lightweight. The speedform technology also makes it lighter and gives more sound and feel but less vibration while hitting the ball. 

In contrast, the 0311p irons are the result of XCOR technology. The polymer materials used in these irons make them very lightweight and can create an excellent sound when played. 

Performance: PXG 0311P Vs P790

When you ask about performance, there will be no comparison between them. Both of them are high-performing and game improvement clubs. 

The p790 irons have the forgiveness, swing, and ball speed needed for the mid-to-high handicappers. At the same time, the clubs come with enough control for the low handicappers.

In contrast, the PXG 0311 p gen4 irons could be a game changer for professional golfers. But the club also has some advantages for amateur golfers, such as being lightweight and being a good size. 

Build Quality: PXG 0311P Vs P790 

Both of these iron sets are made from high-quality materials. The p790 iron has a body of 8620 carbon steel and a face of 4140 stainless steel. These are the kinds of materials that make them very lightweight, soft, and durable as well.

Besides, the body construction of PXG 0311p irons is also much better. These clubs are made of high-quality R&D polymer materials.

As we mentioned, the club has a face of HT1770 maraging steel, which allows it to feel light yet durable at the same time. 

Price: PXG 0311P Vs P790 

The major difference between these two is their price. The PXG 0311p irons are much more expensive than the P790 irons.

A complex polishing and welding process and high-quality materials lead them to be very expensive. So, these irons may not be affordable for everyone. 

But the p790 irons have a reasonable price without compromising performance. So, you can get a high-performing club set at a cheaper rate. 

Lie and Loft: PXG 0311P Vs P790 

Lie and loft are the key specs of a golf club. To compare these two clubs more precisely, let’s have a look at the comparison charts of their lie and loft. 

PXG 0311 P GEN4 Lie and Loft Chart


Taylormade p790 Lie and Loft Chart

Club Lie Loft 
662° 26.5° 

PXG 0311P or p790 irons: Which One Should You Choose?

When it comes to choosing a specific club from two competing brands, it is quite difficult to make a decision.

There are multiple things like workability, durability, price, consistency, performance, and so on to consider when you’re in a debate.

If you have a big budget and want to try the premium level of performance, it’s better to go with the PXG 0311p irons.

Otherwise, the p790 iron set will be the best choice. It may be a cheaper one, but still a world-class performer. 

Besides, when you’re looking for larger club heads that are very forgiving and ideal for newbies, the P790 irons are the right option.

Because the PXG 0311 p gen4 iron set is mid size and suitable for mid-handicappers or professionals. 

After all, we can say that both of them are good performers and game improvement clubs. So, hopefully, PXG 0311 p vs p790 irons wouldn’t be so difficult to answer. 

Frequently Asked Questions (FAQs)

By now, you get the key distinctions between these two golf clubs. Here are some of the most commonly asked questions.

Is The P790 More Forgiving Than The PXG 0311 P GEN4 Irons?

Yes. The p7980 club is more forgiving than the PXG 0311 p gen4 irons. These irons are quite lightweight and soft, which gives them outstanding forgiveness. 

Which Is The More Beginner-Friendly Iron Between The Taylormade P790 And PXG 0311 P GEN4 Irons?

The TaylorMade p790 irons have larger club heads, which allow the player to hit the ball very easily. So, the p790 irons are considerably more beginner-friendly than the PXG 0311p irons.

Which Of The Taylormade P790 And PXG 0311 P GEN4 Irons Is More Expensive?

The PXG 0311 P GEN4 irons are more costly than the P790 irons. As we discussed, the PXG 0311p irons are made of world-class polymer materials and require a complex welding procedure. So, naturally, they’re slightly more pricey than the p790.

Read Also: Callaway Apex 21 vs. Taylormade P790: Which Iron to Choose?

Similar Posts