TaylorMade M4 vs M6 Driver: Which One Is Right For You?

If you are in the market for a new golf driver, you may be wondering which one to choose: the TaylorMade M4 or the M6.

Both drivers are excellent options, but they do have different features that may make one better for you than the other.

In this TaylorMade M4 Vs M6 Driver debate, we will compare and contrast these two drivers so that you can make an informed decision.

Let’s have a look at the positives and drawbacks of these two-golf driver, as well as a quick description of each.

TaylorMade M4 Vs M6 Driver

TaylorMade M4 Driver

The M4 is TaylorMade’s most forgiving driver to date. It has a larger footprint and a shallower face, making it easier to get the ball up in the air.

The crown is also deeper, which helps with MOI (Moment Of Inertia) for more stability on off-center hits. All these features make the M4 an ideal choice for beginner and intermediate golfers.

TaylorMade M6 Driver

The M6 is designed for higher handicappers who want more forgiveness and distance.

It has a slightly smaller footprint than the M4 and a taller and wider face, giving you more room to hit it off-center.

The crown is also slightly flatter, which increases stability on off-center hits.

TaylorMade M4 vs M6 Drivers: Quick Comparison Table

If you don’t have much time, we’ve put up a brief table below for you. We do, however, advise that you read the entire piece to have a clear understanding of TaylorMade M4 and M6 drivers, as well as their distinctions.

Key FactorsTaylorMade M4TaylorMade M6
DesignTwist Face and Speed Pocket designed for forgivenessSleek, aerodynamic shaping with “inertia generator”
Head materialsGraphiteSteel
Golf club loft10.5 Degrees21 Degrees
Sound and feelExplosive sound and exceptional feelVery nice sound, enhance feel
Center of GravityEven lower center of gravity (CG) than M6Slightly lower center of gravity (CG) from the ground
PriceAffordableAffordable

Difference Between TaylorMade M4 and M6 Drivers (Explained)

Let’s take a look at what else we may learn about them after comparing their most significant features.

Design

TaylorMade M4 driver is designed with technology that is meant to improve your game. Twist Face and Speed Pocket provide improved forgiveness and corrective performance across the face.

Additionally, the clubhead is movable, which allows you to adjust it to fit your swing.

On the other hand, the Sleek, aerodynamic shaping design of the TaylorMade M6 Driver helps you to swing faster and deliver more clubhead speed.

Additionally, the Twist Face technology in this golf driver allows to correct ball striking errors for straighter shots. Finally, the Speed Pocket feature increases the size of the sweet spot for better performance on shots hit low on the face.

Head materials

The head material of the TaylorMade M4 driver is Graphite, which is one of the most popular materials for golf clubs. It is durable and light, which means that it can create more clubhead speed for you.

The club’s weight distribution is also optimized, so you will be able to get the most out of your swing.

Whereas the TaylorMade M6 driver head is made of steel, and the crown is made of proprietary racetrack-weave carbon fiber.

The weight saved from using this type of carbon fiber in place of a metal material allows TaylorMade to position the center of gravity low and forward in the head, which increases ball speed and forgiveness on off-center shots.

Golf Club Loft

The M4 club has a loft of 10.5 degrees, which helps to create a higher trajectory and increase the ball speed. This results in longer shots that are more accurate, making it easier to reach the green. It can be adjusted to 9.5, 10.5, or 12 degrees.

The TaylorMade M6 has also a driver loft of 10.5 degrees, which is the most common loft for drivers. The loft on the M6 driver can be adjusted to 9, 10.5, or 12 degrees.

The higher the loft of a driver, the more carry it will have and the less roll it will have. The lower the loft of a driver, the less carry it will have and the more roll it will have.

LoftM4M6
HANDLIELENGTHVOLUMEHANDLIELENGTHVOLUME
9°    RH/LH56°-60°45.75″460CC
9.5°RH/LH56°-60°45.75″460CC    
10.5°RH/LH56° – 60°45.75″460CCRH/LH56°-60°45.75″460CC
12°RH56° – 60°              45.75″460CCRH56°-60°45.75″460CC

Center of Gravity

The M6 has a slightly lower center of gravity from the ground, while the M4 has an even lower one from than the M6.

This difference in skew makes it easier to hit the ball off-center without excessive loss of yardage.

It also gives the M6 more of a “spin” feel when hitting the ball off-center. That is to say that it seems easier to hit the ball with a draw or cut, even if you’re slightly off target.

Sound and Feel

The TaylorMade M4 driver has Geocoustic technology, which uses cutting-edge sole shaping methods to provide a solid and powerful sound with an excellent feel. The recessed sole contour also frees up the volume, allowing for a larger clubface and a better sweet spot.

In the case of the M6 golf driver, there are two different weight ports located at the rear portion of each clubhead, which can be used to enhance the feel and center of gravity location. These ports enable golfers to change both head weights as well as lofts – something that the M4 does not offer.

Technology Used

TaylorMade M4 DriverTaylorMade M6 Driver
Twist Face technologyHammerhead slotGeocoustic soleMulti-Material Carbon CrownTwo-Tone Crown AlignmentAdjustable Loft Sleeve (+/- 2°)Twist Face technologySpeed Injected technology46g Inertia GeneratorHammerhead 2.0 slotMatte Black Carbon CrownMulti-Material Carbon SoleRefined Two-Tone Crown AlignmentAdjustable Loft Sleeve (+/- 2°)

Price

The TaylorMade M4 has an affordable price tag, making it one of the most cost-effective drivers currently on the market. This makes it an excellent choice for beginners or golfers seeking to save money without compromising performance.

The M6 is somewhat more expensive than the M4, which is still considerably less than other drivers with comparable functions.

TaylorMade M4 or M6 Driver: Which Driver Is Right For you?

Well, if you are looking for a club with a slightly lower center of gravity, then the M6 would be a better buy.

It also offers more customization options in terms of shafts and weights, which can give you more control over your shots.

However, if you are looking for something with a more prominent “sweet spot” and less spin, then the M4 would be a better choice.

Ultimately, it all comes down to personal preference. Happy golfing!

Similar Posts