How to Fix EZGo 48 Volt Golf Cart Won’t Move Problems?

We understand how dealing with any issue of a premium golf cart like EZGO 48 volt can be really heartbreaking. That’s why we decided to show you how you can deal with an EZGO 48-volt golf cart won’t move problems.

A micro switch, solenoid, or ignition switch issue could prevent an EZGO golf cart from moving. The golf cart may also not move due to loose or corroded cable connections or a defective controller.

Whatever the case is the problem is real and cause much pain when occur. Considering this hassle we have come with some quick fix that may help you deal with the problem and enjoy a smooth riding. So, read on!

Why the EZGO 48 Volt Golf Cart Won’t Move?

It can really get on your nerves when your 48 volt ezgo golf cart refuses to move even if it gets power and you are clicking in with your key.

There are a few reasons that can cause your golf cart not to move. But what are those? Let’s read below to find out. 

Broken Microswitch

There are numerous golf cart applications for micro switches. The solenoid receives a signal from them at the accelerator pedal indicating that you have pushed the pedal and are ready to move.

So, if the microswitch of your golf cart isn’t working, then that might be the reason the cart isn’t moving. 

Defective Solenoid

The solenoid is the little device that sits above the engine’s starter. Your golf cart’s solenoid distributes electricity from the battery to the other parts.

A solenoid may create a magnetic field by using an electric charge. That’s why a defective solenoid may also make your golf cart not move when you are trying to start it. 

Malfunctioning Ignition Switch

An ignition switch is a catalyst that unites the engine to the battery and causes the vehicle to start. So, the ignition switch on a golf car is unquestionably a crucial component. 

The majority of EZ GO vehicles equipped with lights can use this universal ignition switch.

So, it is possible that some problem with the ignition switch can easily prohibit your golf cart from moving.

Loose Cables or Connections

Cables connect your golf cart’s engines to the entire vehicle and they have many jobs to accomplish.

What it takes are the thicker gauge wires to transfer energy from the batteries to the motor by way of your electrical system’s components.

So, if important cables and connections are loose or get rusted after a long time of use, it may cause your golf cart to not move forward or backward.

Damaged Controller

Using a gas pedal, a throttle, or even bicycle pedals as a form of user input, the controller measures the current and voltage on your battery.

You may manage your acceleration, deceleration, and the speed at which your golf cart travels with the controller.

Therefore, a defective controller may be the reason your golf cart is facing problems moving. 

Dead Battery

Have you evaluated the battery strength of your golf cart? Sincerely be told, you need to check this before you replace anything in your cart.

This is because the most frequent reason for golf cart operational problems is battery failure.

Although the battery might be able to “click” the starting, it might not be sufficient to power the vehicle for the remainder of your journey.

Malfunctioning Starter Generator

Any golf cart’s starter generator is a crucial component since it keeps it running smoothly and enables trouble-free starting.

The starter generator may “click” as you would expect it to ordinarily do, but if it’s broken, there’s a strong possibility it won’t start. 

And as a result, you can end up staying still and having problems getting your cart to move.

Low Tires

The majority of cart owners probably aren’t aware of how necessary it is to maintain correct tire pressure in order to avoid motor problems.

Poorly inflated tires can accelerate battery drain on many models, even if they may be kept inflated to prevent problems with tire wear and tear.

This is due to the fact that the battery may deplete more quickly and it will need more power to drive the cart.

8 Quick Fix For EZGO 48 Volt Golf Cart Won’t Move Problem

We tried to narrow down every possible issue that can get in the way of moving your golf cart. Now it is time to figure out how to solve these issues to get your cart moving. 

And we have gone through the trouble of looking for those answers just for your convenience. Let’s read below to find out the solutions. 

1. Check for Possible Broken Microswitches and Replace

As microswitches are an integral part of your golf cart to get them moving, you need to check if any of your microswitches are broken or aren’t stuck midway. 

If they are just stuck, releasing them would solve your problem. But if you see any sign of wear and tear, you must replace them without any doubt. 

Checking to see if the key switch’s tab has gone loose at this time is a smart idea. If so, you need to repair it or replace the switch. And it will cost you 8 to 10 dollars. 

2. Replace Faulty Solenoids

Solenoid wear is a frequent cause of the current interruption. As you depress the gas pedal, the solenoid compounds down into a thin metal contact plate each time it activates.

By frequently checking the contact plate’s condition and changing it whenever there are indications of severe wear, you can avoid this issue. You will need to swap the plate more frequently the more often you use your cart. 

The price of the solenoid varies depending on the voltage. But for a 48-volt EZGO golf cart, it will cost you around 50 dollars.

3. Fix the Damaged Ignition Switches

A faulty ignition switch won’t even start your Ezgo 48 volt golf cart, let alone allow moving. And to avoid this issue, check the operation of the ignition switch.

To do this, connect an ohmmeter to the wires beneath the dash, connect them to the battery, and check the reading. Change the switch if you receive no readings.

Golf cart ignition switch replacements typically cost between $180 and $220. Between $109 and $138 is the expected cost of labor, while between $71 and $82 is the projected cost of parts.

4. Check for Loose Cables or Connections to Replace

Loose cables on your 48 volt EZGo not only prevent your golf cart from moving but also endangers the safety of your vehicle. 

That’s why verify that all cable connections are secure. Tighten every cable that is loose. Replace any rusted connections with new ones. It will cost you around 18-20 bucks.

5. Replace Damaged Controller If Needed

The controller in an electric golf cart like 48 volt EZgo is referred to as the system’s brain and resembles and functions very much like the motherboard of a computer.

So make sure the controller is operating as it should. If not, it’s probably flawed and you may need to find a replacement. And it can cost you like 75 dollars. 

6. Check for Dead Battery and Replace

Your golf cart sure won’t run with a dead battery. So, to check on your battery, put it on a charger for the necessary amount of time, then take it off.

Then check the electrical strength. You may need to replace the battery right away if it loses its ability to hold a charge.

Changing your golf cart battery can be expensive. It can cost you between 800 and 1500 dollars.

7. Replace Malfunctioned Starter Generator

If this component is damaged and preventing your cart from working, you should replace it immediately.

You won’t be able to move if it’s not working, and you might experience some issues with the operation of your cart.

This problem can only be resolved by changing the starter generator in the engine. And replacing it can cost you around 300 dollars. 

8. Check Tire Pressure

You should always check the tire pressure while using your golf cart and inflate it whenever needed.

Driving with a low tire might even cause the engine to malfunction. So, it is pretty important.

Inflating your tires won’t cost you much. You can get it done by yourself easily at home. Or you can seek help from a local garage.

FAQs.

Even though we tried to cover everything regarding issues with the golf cart not moving, it can be a little complicated to understand everything. 

And to understand the issues more clearly, the following answers to frequently asked questions might help.

Final Words

Facing problems with your golf cart can be stressful when you just love golfing on your weekends. So, we tried to show you how you can fix your EZGO 48 Volt Golf Cart won’t move related problems.

It is important to take care of a cart problem as soon as you face it. But what is more ideal is if you do proper maintenance of your golf cart on a regular basis. In this way, you will face much fewer problems regarding your vehicle.

And proper maintenance will save you a lot of money in the long run as well. Hope you found your answer to the question you had from this article. Happy Golfing!

• Read Also: EZGo Electric Golf Cart Beeping: Understanding and Resolving
• Read Also: E-Z-Go Electric Golf Cart Not Moving: Troubleshooting Guide
• Read Also: Why Is My EZGo Charger Blinking Red? [Troubleshooting Tips]
• Read Also: How to Fix EZGo Golf Cart Won’t Move Problem? (Understanding and Resolving)
• Read Also: EZGo Golf Cart Won’t Go Forward or Reverse: 6 Easy Solutions