Why Club Car Solenoid Not Clicking? [6 Reasons & Solutions]

Club Cars are well renowned golf carts in the market. However, have they been malfunctioning for you? Could it be that the solenoid of the Club car is not clicking for your case?

When your solenoid is not clicking in your Club Cart, it may mean that your Club car might not get enough electricity to power the whole system. Not getting enough electricity can be problematic due to multiple issues, such as a faulty solenoid, issues with the activation circuit, etc.

So if your Club Car’s solenoid is not clicking at all, this guide may have for you. Today, we will be covering the ways we can find and fix the solenoid problem of the Club cart.

Why Club Car Solenoid Not Clicking

What Causes Club Car Solenoid Not Clicking?

The solenoid is a delicate part of the golf cart which works when only provided with sufficient electricity.

There can be multiple reasons for the solenoid not to receive enough electricity and hence not click. We have listed a couple of causes for you to look at.

  • A faulty solenoid 
  • Low powered battery
  • Corroded battery terminals
  • Loose/ Worn out connections leading to the solenoid
  • Damaged/ faulty ignition switch
  • Problems with the starting circuit

What are the symptoms for the Club Cart Solenoid not clicking issue?

Just with every issue/ problem, you will see some symptoms whenever you are hit with the issue, such as the solenoid not clicking on your Club Cart.

These symptoms range from visible problems to audible problems. We have arranged a list of the symptoms that you will notice.

  1. No clicking sound from the solenoid
  2. The very low sound coming from the solenoid
  3. The engine is not cranking up/ booting up at all
  4. The motor may stay running even after the engine starts

4 Solutions For Club Car Solenoid Not Clicking Problems

There will be multiple methods through which you can fix the issue. Therefore, we advise you to try out every method and see whether your car is fixed or not. Let us move to the solutions.

Method 1: Replacing the battery of the Club Car

Battery
Battery

The Club Car battery is the source of all energy in the cart. It is the energy provider which helps to run the vehicle smoothly across the course.

When it becomes damaged, there is a high chance that it will not provide energy to the solenoid, thus causing the not clicking issue.

Here is a simple step-by-step guide on how to replace the damaged/ corrupted battery of the Club Car:

  1. Place your Club Car in Tow mode first.
  2. Please take off the golf cart seats and the external frame by unscrewing the bolts which are holding them.
  3. You will see a black plastic hood once you take off the seats. Some models allow the hood to take it off just by pulling. However, you should look for screws before you start pulling.
  4. After that is taken out, you will see the batteries. Start by disconnecting the negative terminals of the batteries first. Then do the same thing for the positive terminal.
  5. Take the batteries out one by one and replace them with the new ones accordingly.
  6. Reinstall everything back into its place and take the cart out for a test drive.

Method 2: Replacing the solenoid of the Club Car

Solenoid
Solenoid

Solenoids are a barrier between the battery and the Club car’s motor. When you find your solenoid faulty, it will be unable to channel the energy generated from the battery to the motor to run the cart.

Hence, your Club Car will not be able to move. Here is a step-by-step guide on replacing the Club Car’s solenoid.

  1. Find the name of the model of the Club Car and look for the location of the solenoid. You will be able to find the information in your manual guide.
  2. Once you have located it, remove the seats and the frame by unscrewing the bolts/ screws. You will now have more room to work with and freely too.
  3. Disconnect the positive terminals of the batteries before you move on to the next step. This will prevent you from getting any shocks.
  4. Locate the solenoid and take a picture of the wirings. After that, unplug/ take off the wirings one by one.
  5. Replace the old solenoid with the new one and do the wirings accordingly. Make sure that the new solenoid is identical in size to the old one.
  6. Now that you are done with all the steps, boot up the engine and check whether it is revving up or not.

Method 3: Replace the wirings of the Club Car

Replacing the wires might look trivial, but it is important and should not be overlooked. Wirings/ Connections connect the pieces of machinery/ parts and allow them to work in sync as a complete machine.

A torn/ eroded wire can alter the system’s workings by sending signals late. This is enough to slow down the normal functioning of the cart to halting it completely.

This fix requires you to inspect all the wirings closely and check whether there are any wear/ tears. If you notice one, disconnect the positive terminal of the battery before you replace them. 

Once the replacement is over, rev up the engine and watch out for the clicking sound of the solenoid. If you hear them, your fix was successful.

wirings

Method 4: Contacting a professional

It is okay to feel lost/ overwhelmed when you see that your Club Car is not working. You might be unsure if you can fix the solenoid problem by yourself. In that case, we advise you to contact a professional.

You can head to your local garage and make an appointment with the professional. He/ she will have more knowledge about the issue and can fix it for you without any hiccups. 

However, you may have to explain the issue beforehand to aid with his work. If you choose this method, remember to add a hundred bucks extra as labor costs for the professional.

Frequently Asked Questions (FAQs)

We believe that you have attained a good amount of knowledge about the Club Car and how to tackle the issue. However, there might be some questions lingering in your mind. So, we have arranged a FAQ section to clear your doubts further.

What are the prices of the replacement?

The prices can vary from time to time and with the market too. However, we can still provide a rough estimate. Batteries are costly and can charge you around $1000-$1200.
Solenoids are much cheaper, and you can get one for $200. Wires are the cheapest, and you can get by with a couple of bucks.

What to do when you immediately find the Club Car not clicking?

It is highly advised that you place the cart safely and away from the streets. After that, try to contact a professional for a consultation or try the diagnosis method we have mentioned above. These should be the first steps that you should follow.

Should you change one battery of the Club Car at a time or all at once?

There is no problem if you change one battery at a time. However, it is not advised. This is because of the difference in the time the battery has been exposed to the work, which might cause permanent damage.
Therefore, it is advised that you replace all the batteries if you ever need a replacement.

Which method should you apply first and in which order to tackle the not clicking issue?

Firstly, you must start the diagnosis and confirm the issue you are facing is a not clicking issue with the solenoid. Then, start with method three by inspecting all the wires.
After that, try method 1 (replacing the batteries) and method 2 (replacing the solenoid of the Club Car). Even after that, if you find no progress, go for the final method.

Conclusion

We believe you have now understood everything there was to know about this problem. You should also have gained greater insight into your Club Car.

After reading this article, you can finally cruise through the path of diagnosing to fix it with ease. Before we conclude, we would like to drop one piece of advice.

We advise you to take the Club Car Golf cart to a monthly checkup every three months. This should help to keep your cart clean and problem-free. We wish you all the very best!

Similar Posts